Dell OptiPlex GX1 User Manual page 107

Microprocessor: Dell OptiPlex GX1 Small-Form-Factor System User's Guide
5. Connect the microprocessor fan cable to the connector on the system board.
6. Replace the computer
them on.
NOTE: If Enabled, the
at the next system start-up:
ALERT! Cover was previously removed.
7. Enter the System Setup
identifies the installed processor(s).
8. Run the Dell Diagnostics
Back to Contents Page
file:///C|/infodev/2013/eDoc/OpGX1/UG/process.htm[2/21/2013 11:47:20 AM]
cover, and reconnect your computer and peripherals to their electrical outlets and turn
Chassis Intrusion
program, and confirm that the top line in the system data area correctly
to verify that the new microprocessor is operating correctly.
option will cause the following message to be displayed