Chapter 7 Firewall Service Module - Cisco 7600 Series Module Manual

Chapter 7 Firewall Services Module
The SHUTDOWN button is used to manually shut down the Firewall Services Module. To prevent
corruption of the module, it is critical that the module run through the shutdown procedure before
shutting off. If the module fails to respond to CLI or NAM shutdown commands, you can use the
SHUTDOWN button as an alternative shutdown method.
For further information on the Firewall Services Module, refer to the Catalyst 6500 Series Switch and
Cisco 7600 Series Router Firewall Services Module Configuration Guide, 2.3.
Cisco 7600 Series Router Module Guide
7-3
OL-9392-05