Chapter 5
Multilayer Switch Module
Use a paper clip or a small, pointed object to access the CONSOLE PORT MODE switch.
Note
Use the CONSOLE PORT MODE switch as follows:
Mode 1—Place the switch in the in position (factory default position) to connect a terminal to the
•
console port using the console cable and DTE adapter (labeled "Terminal") that shipped with the
router.
You can also use this mode to connect a modem to the console port using the console cable and DCE
adapter (labeled "Modem") that shipped with the switch.
Mode 2—Not supported.
•
OL-9392-05
Cisco 7600 Series Router Module Guide
5-3