Miele H6360BP Operating And Installation Instructions page 118

Problem solving guide
Problem
The oven does not heat
up.
"Power cut - Process
cancelled" appears in
the display.
12:00 appears in the
display.
The message
"Maximum operating
duration reached"
appears unexpectedly
in the display.
"Fault: F 32" appears in
the display.
118
Possible cause and remedy
^ Check whether the demo mode has been activated
(see "Settings - Showroom programme").
If demo mode has been switched on the oven can be
operated but it will not heat up.
^ Deactivate demo mode.
There has been a power cut which has caused a
current process to stop.
^ Switch the oven off and then back on again.
Start the cooking programme again.
The power supply was interrupted for longer than 200
hours.
^ Reset the time and date.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^ Touch the OK sensor. Touch
"Process finished" from the display. The oven can
then be used again as normal.
The Pyrolytic cleaning programme door lock is not
locking.
^ Switch the oven off and then back on again.
Then restart the Pyrolytic cleaning programme.
If the fault code appears in the display again call the
Miele Service Department.
to clear the message