Table of Contents
Advertisement
Operation (Automatic mode)
When Con@ctivity 2.0 is activated, the
cooker hood always works in automatic
mode (see "Activating Con@ctivity
2.0").
To operate the cooker hood manually,
see "Cooking without Con@ctivity 2.0".
Cooking with Con@ctivity 2.0
(Automatic mode)
Switch a cooking zone on at the
power level you want.
The cooker hood lighting will come on.
After a few seconds the fan will come
on, first at power level 2, then it will
switch immediately to power level 1.
The cooker hood selects the power
level automatically during cooking.
This is determined by the total output of
the hob, i.e, the number of cooking
zones in operation and the power levels
selected.
If you select a higher power level or
are using several cooking zones, the
cooker hood will switch to a higher
power level.
When you reduce the power level or
the number of cooking zones on the
hob, the cooker hood power level is
also reduced.
Examples for power levels 1 to 4
18
Reaction time
The cooker hood reacts with a slight
delay because altering the power level
on the hob does not immediately result
in a reduction or increase in cooking
vapours.
Because the hob transmits the
information to the cooker hood at
intervals, this can also cause delays.
The reaction can vary from a few
seconds to a couple of minutes.
Advertisement
Table of Contents
