Activating Con@Ctivity 2.0; Activating The Cooker Hood; Activating The Hob; Activation Check - Miele DA 6296 W Operating And Installation Instructions

Cooker hood
Hide thumbs Also See for DA 6296 W:
Table of Contents

Advertisement

Activating Con@ctivity 2.0

The radio connection between the hob
and the cooker hood must be activated
in order for the Con@ctivity 2.0 function
to be used.
Both appliances must be installed and
operational.
You only need to carry out the signing
on procedure once. If the appliances
are disconnected from the electricity
supply, during a power cut for example,
they will still remain signed on.
To establish the radio connection, the
cooker hood and hob must be
activated at the same time.
First activate the cooker hood, then the
hob.

Activating the cooker hood

 Switch off the fan, hob lighting and
hob.
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the hob lighting .
If the Con@ctivity 2.0 function is not
activated, 2 and 3 will flash
simultaneously.
 Press "" to activate Con@ctivity
2.0.
2 will light up constantly and 3 will
flash. The search for a radio connection
is started.
Activating Con@ctivity 2.0
 Meanwhile, start the activation of the
hob.

Activating the hob

 While the cooker hood is searching
for the radio connection, start
activating the hob.
More information about this can be
found in the operating instructions for
the hob.
When the radio connection has been
established, 2 and 3 will light up
constantly on the cooker hood.
 Confirm the activation of the cooker
hood by touching the run-on option
control 515. All indicator lamps will
go out.
 Confirm the activation at the hob.
Con@ctivity 2.0 is now ready to use.
If you do not confirm your selection
within 4 minutes, activation will not take
place.

Activation check

If you wish to check whether
Con@ctivity 2.0 is activated on the
cooker hood:
 Switch off the fan and hob lighting.
 Press the run-on option control
515 for approx. 10 seconds until
the indicator for power level 1 lights
up.
 Then press in turn,
– the "" control,
– then the "" control,
– then the hob lighting .
41

Advertisement

Table of Contents
loading

This manual is also suitable for:

Da 6296 w ext

Table of Contents