Make Use Of Bridge Interface In Routing Mode - ZyXEL Communications P-660R-Tx Series Support Notes

Here you can choose the first three types of Encapsulation for routing mode.
(2) Configure a LAN IP for the P-660R-Tx and the DHCP settings in Web
Configurator, Advanced Setup, Interface Setup -> LAN -> DHCP.

3. Make use of Bridge Interface in Routing mode

Using Bridge Interface in routing mode allows you to connect to internet with
both Routing and Bridging. A route channel for your device and a bridge
channel for your pc, but they use the same PVC so we needn‟t two PVCs to do
multicast, you also need not to set a new VLAN on the DSLAM. One of the use
scenarios shows below:
P-660R-Tx
172.25.27.13
All contents copyright © 2010 ZyXEL Communications Corporation.
P-660R-Tx Series Support Note s
26