Optoma H31 Service Manual page 40

New Version
Step1.
Step2.
Step3.
Step4.
*Notice : Confirm JP3 is "Close" status (EDID Mode).
P3
JP3
Power Adapter
Coretronic Corporation
Connect Power Adapter with the fixture.
Connect P1 of the fixture with COM1 of PC by RS232 cable.
Connect P3 of the fixture with DVI port of DVI-DVI cable.
Plug Power Adapter to the fixture and connect the H31 Power Cord.
P2
P1
(Figure 2 : Finish Setup)
P4
6-3 H31