6-2
Setup Procedure
Old Version
Step1.
Step2.
Step3.
Power Adapter
Power Switch
Step4.
(Figure 1 and 2)
Step5.
Step6.
Coretronic Corporation
Connect Power Adapter with the fixture.
JP1 and JP5 on the fixture are close, and JP2 is open.
Turn on the fixture.
P2
(Figure 1 : Flash Board)
Connect P1 of the fixture with COM1 port of PC by RS232 cable.
Connect P3 of the fixture with the DVI port of H31 by DFP-DVI cable.
Connect H31 with Power Cord.
P3
6-2
P1
H31