Optoma EX542 Service Manual page 90

6-8 Setup Procedure �HDMI�
��or E���2�E�61��E�����
E��62�E����I�E���2I�
1. Connect all ports
(1) Connect P1 of fixture with COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P5 of fixture with HDMI Port of
projector by DVI Cable.
(3) Plug Power Adapter to JP1 of fixture.
(4) Power on fixture.
(5) Plug Power Cord to projector.
Note: You must confirm that the JP3 is closed in
all procedure.
6-9 EDID Key-In Procedure �HDMI�
��or E���2�E�61��E�����
E��62�E����I�E���2I�
1. Execute EDID Program
- Double click "EDID" to execute EDID
program.
EX540/EX542/EX612/EX615/EX762EX540I/EX542I/ES523ST/EW533ST Confidential
RS232 Cable
RS232 Cable
P1
JP3
HDMI Port
Power Port
Adapter
JP1
P�
DVI Cable
DVI Cable
6-10