Optoma EX542 Service Manual page 54

2. Network Setting
(1) Open the "Local area connection", choose "properties".
(2) Select "Internet protocol (TCP/IP)", then click
"Properties".
(3) Modify the IP address to 192.168.0.101, and modify
Subnet mask to 255.255.255.0.
Note: - The HOST ID (192.168.0.XXX) of PC
IP address must be different from the
projector IP address written down in
step 1 of 4-10.
(4) Click "OK".
(5) Click "Close" to quit the setting screen.
EX540/EX542/EX612/EX615/EX762/EX540I/EX542I/ES523ST/EW533ST Confidential
4-16