Table of Contents
Advertisement
IMPORTANT! Use only a Power Wheels
(4.0 Amp/Hr) rechargeable battery. Use of any other
battery will damage your vehicle.
1
•
Loosen the screws in the seat back with
a Phillips screwdriver.
2
•
Grasp the seat back and lift firmly to remove the seat.
BATTERY INSTALLATION
®
6 volt
Loosen
these
screws.
3
• Remove the #8 x ¾" screw from the battery retainer.
Lift to remove the battery retainer from the vehicle.
4
• Place the Power Wheels
in the battery compartment. Make sure the battery
connector extends toward the rear of the vehicle.
11
Battery Retainer
6 Volt (4.0 Amp/Hr.)
Battery
®
6 Volt (4.0 Amp/Hr.) battery
T3639a-0920
Advertisement
Table of Contents
