Table of Contents
Advertisement
WARNING
Children can be harmed by small
parts, sharp edges and sharp points
in the vehicle's unassembled state,
or by electrical items. Care should be
taken in unpacking and assembly of
the vehicle. Children should not handle
parts, including the battery, or help in
assembly of the vehicle.
1
•
Plug the motor harness connector from the vehicle
into the steering wheel connector.
2
•
While carefully feeding the wire down into the dash,
fit the steering wheel onto the dash.
T3639a-0920
ASSEMBLY
Steering Wheel
Connector
Motor Harness
Connector
3
•
Turn the steering wheel slightly to access the hole in
the side of the steering column.
•
Insert the #8 x
/
" screw into the hole on the side of
3
4
the steering column. Tighten the screw with a Phillips
screwdriver. Do not over-tighten.
Hint: For your convenience, there is a hole in each side
of the steering column and an extra #8 x ¾" screw.
You will only need to use one screw on one side of the
steering column to fasten the steering wheel.
Steering
Wheel Cover
4
•
Fit a slotted screwdriver into the slot on the steering
wheel, as shown.
•
Carefully remove the steering wheel cover from the
steering wheel.
8
SIDE VIEW
Slot
Advertisement
Table of Contents
