Renault KOLEOS User Handbook Manual page 39

chILd sAfETY: choosing a child/baby seat mounting
1
2
The two rings 1 are located between
the seatback and the seat base (behind
a cover) and are identified by a mark-
ing.
To ensure your child seat can be easily
fitted and locked on rings 1, use access
guides 2 on the child seat.
The ISOFIX anchorage points have been exclusively designed for child
seats with the ISOFIX system. Never fit a different type of child seat, seat
belt or other objects to these anchorage points.
Check that nothing is obstructing the anchorage points.
If your vehicle has been involved in a road accident, have the ISOFIX anchorage
points checked and replace your child seat.
Ofrecido por www.electromanuales.com
3
The third ring is used to attach the
upper strap on some child seats.
To access it, pass the belt on the child
seat behind the rear bench seatback,
then open flap 4.
(2/2)
Fit the hook of the strap onto ring 3 and
pull the strap so that the seatback of the
child seat comes into contact with the
top of the seatback on the vehicle seat.
4
In this case, the child seat may not
always rest on the seat base of the
vehicle seat.
Check that the seatback of
the forward-facing child seat
is in contact with the seat-
back of the vehicle seat.
1.33