Own video in recvd. call
•
during a video call from your device.
Image in video call
— Display a still image if video is not
•
sent during a video call.
Automatic redial
— Set your device to make a maximum
•
of 10 attempts to connect the call after an unsuccessful call
attempt. To stop automatic redialling, press the end key.
Show call duration
— Display the length of a call during
•
the call.
Summary after call
— Display the length of a call after
•
the call.
Speed dialling
— Activate speed dialling.
•
Anykey answer
— Activate anykey answer.
•
Noise cancellation
— Activate earpiece active noise
•
cancellation.
Contact search
— Activate contact search in the home
•
screen.
Network settings
Select
Menu
Ctrl. panel
>
Network.
To select the network mode, select
mode, UMTS, or GSM. In dual mode, the device switches
automatically between networks.
Tip: Selecting
UMTS
may increase the demand on battery power and reduce
the battery life. In regions close to both GSM and UMTS
networks, selecting
jumping between the two networks, which also
increases the demand on battery power.
— Allow or deny video sending
Settings
and
Phone
>
Network mode
enables faster data transfer, but
Dual mode
may cause constant
To select the operator, select
Manual
to select from available networks, or
set the device to select the network automatically.
To set the device to indicate when it is used in a microcellular
network (MCN), select
Connection settings
Select
Menu
Select from the following:
Bluetooth
•
USB
— Edit the data cable settings.
•
Destinations
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
VPN
— Manage the settings for virtual private
•
networking.
Packet data
•
>
attached, and enter the default packet switched access
point name if you use your device as a modem for a
and
Dual
computer.
Wireless LAN
•
when a wireless LAN (WLAN) is available, and define how
often the device searches for networks.
SIP settings
•
(SIP) profiles.
XDM profile
•
required for many communications applications, for
example, presence.
Operator selection
Cell info display
Ctrl. panel
Settings
>
>
— Edit the Bluetooth settings.
— Set up new or edit existing access points.
— Define when packet data network is
— Set the device to display an indicator
— View or create session initiation protocol
— Create an XDM profile. The XDM profile is
and
Automatic
to
> On.
and Connection.
47