To add access points to an access point group, select the
group and
Options
New access
>
access point from another group, select the group, scroll to
an existing access point, and select
Copy to other
dest..
To change the priority order of access points within a group,
scroll to an access point, and select
Change
priority.
Packet data access points
Select
Menu
Ctrl. panel
>
Destinations
Access
>
on the display. Or, open one of the access point groups, and
select an access point marked with
Use the instructions provided by your service provider to edit
the following:
Access point name
— The access point name is provided
•
by your service provider.
User name
— The user name may be needed to make a
•
data connection, and is usually provided by your service
provider.
Prompt password
— If you want to set the device to ask
•
for a password every time you log in to a server, or if you
do not want to save your password in the device, select
Yes.
Password
— A password may be needed to make a data
•
connection and is usually provided by your service
provider.
Authentication
— Select
•
password encrypted or
encrypted when possible.
point. To copy an existing
Options
Organise
>
Options
Organise
>
Settings
and
Connection
>
point, and follow the instructions
.
Secure
to always send your
Normal
to send your password
Homepage
— Depending on the access point type you
•
are setting up, enter the web address or the address of the
multimedia message centre.
Use access point
•
>
device to ask for confirmation before the connection using
this access point is created, or
device to connect to the destination using this access point
>
automatically.
Select
Options
Advanced settings
>
following:
Network type
•
>
transfer data to and from your device. The other settings
depend on the selected network type.
Phone IP address
•
of your device.
DNS addresses
•
and secondary DNS servers, if required by your service
provider. To obtain these addresses, contact your internet
service provider.
Proxy server address
•
server.
Proxy port number
•
server.
WLAN internet access points
Select
Menu
Ctrl. panel
>
Destinations
Access
>
on the display. Or, open one of the access point groups, select
an access point marked with
Use the instructions provided by your service provider to edit
the following:
WLAN network name
•
Search for
networks. If you select an existing network,
— Select
After confirmation
Automatically
and from the
— Select the internet protocol type to
(for IPv4 only) — Enter the IP address
— Enter the IP addresses of the primary
— Enter the address of the proxy
— Enter the port number of the proxy
Settings
and
>
point, and follow the instructions
, and select
— Select
Enter manually
to set the
to set the
Connection
>
Options
> Edit.
or
49