Access Points; Create A New Access Point; Create Access Point Groups - Nokia E72 User Manual

Presence — Edit the settings for presence (network
•
service). To register for the service, contact your service
provider.
Remote drives — Connect the device to a remote drive.
•
Configurations — View and delete trusted servers from
•
which your device may receive configuration settings.

Access points

Create a new access point

Select Menu Ctrl. panel
>
Destinations.
You may receive access point settings in a message from a
service provider. Some or all access points may be preset for
your device by your service provider, and you may not be able
to change, create, edit, or remove them.
When you select one of the access point groups (
, ), you can see the access point types:
indicates a protected access point
indicates a packet data access point
indicates a wireless LAN (WLAN) access point
Tip: You can create internet access points in a WLAN
with the WLAN wizard.
To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are displayed
and can be shared by a new access point. If you skip this step,
you are asked to select a connection method and to define
the settings needed.
48
Settings and Connection
>
,
Access point. The
To edit the settings of an access point, select one of the access
point groups, scroll to an access point, and select
Edit. Use the instructions provided by your service provider
to edit the following:
Connection name
•
Data bearer
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
be defined or with a red *. Other fields can be left empty,
unless your service provider has instructed otherwise.
To use a data connection, your service provider must support
>
this feature, and if necessary, activate it for your SIM card.

Create access point groups

Select Menu Ctrl. panel
>
Destinations.
Some applications allow you to use access point groups to
, ,
connect to a network.
To avoid selecting which access point to use every time the
device attempts to connect to a network, you can create a
group that contains various access points, and define the
order in which the access points are used to connect to a
network.
For example, you can add wireless LAN (WLAN) and packet
data access points to an internet access point group and use
the group for browsing the web. If you give the WLAN access
point the higher priority, the device connects to the internet
through a WLAN if available and through a packet data
connection if not.
To create a new access point group, select
Manage New
>
— Enter a name for the connection.
— Select the data connection type.
Settings and
>
destination.
Options
>
Must
Connection
>
Options
>