Table of Contents
Advertisement
High Frequency Driver replacement continued:
1
4
1
-
4
8
Four screws and locking washers may
be removed from the high frequency
driver using the phillips head screwdriver.
Notice the placement of the terminals,
as well.
2
-
+
3
2
+
3
9
Keep the four screws and locking
washers in a safe place.
10
The high frequency driver easily lifts
right off of the horn. Replace with
the new driver (part #0014194) and
follow the same steps as above,
but backwards 9 to 1. Power up the
SR1530z and the new driver should
now be pumping out those highs
again. Fantastic, you just replaced
a high frequency driver!
9
Advertisement
Table of Contents
