Table of Contents
Advertisement
Woofer replacement continued:
+
5
*
Positive (solid yellow) and negative
(yellow and black) cables are still
attached to woofer terminals.
Push
in
6
*
Remove cables from terminals simply by
pushing down on terminal and pulling
out cable.
*
These two pictures were taken during an SWA1501 woofer repair. The
same principle applies to the SR1530z.
-
7
This is what it looks like with the grill and
woofer removed. Place new woofer
(part #0013916) where the old one was.
Follow the same steps as above, but
backwards 6 to 1, making sure to keep
the led PCB assembly cable in front of
woofer. Power up the SR1530z and the
new woofer should now be pumping
out glorious lows. Awesome, you just
replaced a 15" woofer!
6
Advertisement
Table of Contents
