Table of Contents
Advertisement
Mid Frequency Driver replacement:
1
Follow steps 1-6 of the high frequency
driver replacement instructions, as the
grill and horn will need to be removed
in order to access the mid frequency
driver.
1
8
7
6
1
8
7
6
2
Eight screws and locking washers may
be removed from the mid frequency
driver cover plate using the phillips head
screwdriver. Notice the placement of the
terminals, as well.
2
3
4
-
+
5
2
3
4
-
+
5
3
Keep the eight screws and locking
washers in a safe place.
-
+
Pull out
4
The mid frequency driver cover plate
easily lifts right off of the horn. Positive
(solid green) and negative (green
and black) cables are still attached to
the mid frequency driver cover plate
terminals. Remove the cables from the
terminals simply by pulling on the end
of each cable. Do not force cable
removal, although needle-nose pliers
may aid in tightly crimped cables.
10
Advertisement
Table of Contents
