Table of Contents
Advertisement
13
Amp assembly replacement continued:
1 2 3 4 5 6
7
top down view
(close up)
2
Keep the 16 screws in a safe place.
side view
3
Amplifi er assembly is now ready to be
separated from the cabinet. Do not
completely take amplifi er assembly
off yet, as seven cables need to be
removed fi rst (as shown above). Each
cable must be attached to the same
terminal that it was removed from:
(1) yellow, (2) yellow/black, (3) green,
(4) green/black, (5) blue, (6) blue/black,
and (7) led pcb assembly cable (white
cable next to the blue and black cable).
top down view
Caution:
amplifi er assembly is
approximately 18 pounds, so please
make sure to grasp it fi rmly.
Advertisement
Table of Contents
