Table of Contents
Advertisement
High Frequency Driver replacement continued:
-
5
Positive (solid blue) and negative (blue
and black) cables are still attached
to the high frequency driver terminals.
Remove the cables from the terminals
simply by pulling on the end of each
cable. Do not force cable removal,
although needle-nose pliers may aid in
tightly crimped cables.
Push down
6
Positive (solid green) and negative
(green and black) cables are still
attached to the mid frequency driver
terminals. Remove the cables from the
terminals simply by pushing down on
each terminal and pulling out the cable.
+
Pull out
-
+
7
This is what it looks like with the grill and
horn removed. See next page for further
instructions and additional pictures on
how to remove and replace the high
frequency driver.
8
Advertisement
Table of Contents
