Programming A Stored Channel Frequency In The Priority Channel; Programming The Priority Channel Directly; Programming A Weather Channel As Priority - Radio Shack PRO-96 Owner's Manual

The priority feature does not operate while the scanner receives a trunking voice
channel or during trunking delay time. Traffic on the priority channel may be missed if
it occurs while the scanner is monitoring a trunking voice call.
If you program a weather channel as the priority channel, then activate priority mode,
the scanner stops on the weather channel only when the scanner detects the 1050
Hz weather alert tone.

Programming a stored channel frequency in the priority channel:

1. Press MAN.
2. Use the number keys to enter the channel number that contains the frequency you
want to program as the priority channel, and then press MAN again.
3. Press FUNC then PRI. Pri Channel blinks on the bottom line to indicate storage of
the current frequency into priority channel memory.

Programming the Priority Channel Directly

1. Press PGM.
2. Press PRI.
3. Enter the frequency you want to enter into the priority channel, then press ENTER.
4. If desired, set the priority channel mode. You can set a priority channel for CTCSS or
DCS operation with a programmed code.

Programming a Weather Channel as Priority

1. Press WX.
2. Select the weather channel you want to program as the priority channel by pressing
WX repeatedly until the desired weather channel is displayed.
3. Press FUNC then PRI. Pri Channel flashes on the bottom line two times.
41