Copying A Frequency Into A Vacant Channel In A Specified Bank; Copying A Frequency Into The Priority Channel; Scanning The Channels; Turning Channel-Storage Banks Off And On - Radio Shack PRO-2053 Owner's Manual

quency. The display indicates the bank
and channel number. After about 1 sec-
ond, the frequency to be copied flashes.
3. Press
ENTER.
receiving mode and delay condition are
copied on the channel.
briefly appears. The scanner automati-
cally returns to search mode.
If you try to copy a frequency which is
already stored, the scanner sounds the
notice tone 3 times after you press
.
ENTER LGCô=ý á?OOO LGCô=ý á?OOO
LGCô=ý á?OOO LGCô=ý á?OOO
bottom line. If you want to copy the
duplicate frequency
, or if not, press
ENTER
Copying a Frequency into a
Vacant Channel in a Specified
Bank
You can copy a frequency into a vacant
channel in a specified bank when the scan-
ner stops on the frequency during search or
tune mode.
1. Press then
FUNC
a frequency you want to copy.
appears.
/KFI<å /K FI<å
/K /K FI<å FI<å
2. If you want to copy the frequency into
bank 9, press
first available vacant channel in the
bank. Or, press your desired bank num-
ber to store, then press
appears for 2 seconds. All the
/KFI<ü /KFI<ü
/KFI<ü /KFI<ü
conditions such as receiving mode and
delay condition are copied on the chan-
nel. After about 2 seconds, the scanner
automatically returns to search mode.
3. If you try to copy a frequency which is
already stored, the scanner sounds the
notice tone 3 times after you press
.
ENTER
LGCô=ý á?OOO LGCô=ý á?OOO LGCô=ý á?OOO LGCô=ý á?OOO
bottom line. If you want to copy the
duplicate frequency
, or if not, press
ENTER
All the conditions such as
á?8Eý /KFI<ü á?8Eý /KFI<ü
á?8Eý /KFI<ü á?8Eý /KFI<ü
appears at the
anyway,
to cancel.
CLEAR
when you find
ENTER
. It is stored in the
ENTER
ENTER
appears at the
anyway,
to cancel.
CLEAR
Copying a Frequency into the Pri-
ority Channel
You can copy a frequency into the priority
channel (see "Priority" on Page 27) when the
scanner stops on the frequency during
Search, Scan, Manual, Tune, or WX mode.
Press
FUNC
on the display. The display flashes twice and
the frequency is copied to the priority chan-
nel.

SCANNING THE CHANNELS

press
To begin scanning channels or to start scan-
ning again after monitoring a specific chan-
nel, press
Note: You must store frequencies into chan-
nels before the scanner can scan them. The
scanner does not scan through empty chan-
nels.
The scanner scans through all channels (ex-
cept those you have locked out) in the active
banks (see "Turning Channel-Storage Banks
Off and On" and "Locking Out Channels or
Frequencies" on Page 26).
â8EBé â8EBé â8EBé â8EBé
Note: To change the scanning direction,
8 8 8 8
press
Turning Channel-Storage Banks
Off and On
.
á?8E á?8E
á?8E á?8E
To turn off banks while scanning, press the
bank's number key so the bank's number
disappears. For example, to turn off bank 1,
press
1
the channels within the banks you turned off.
press
Operation
then when the frequency is
PRI
.
SCAN
9 9 9 9
or .
. The scanner does not scan any of
25