Command Quick Reference Guide; Scan Mode - Radio Shack PRO-96 Owner's Manual

Command Quick Reference Guide

Scan Mode

Keystrokes
SCAN
MAN
PGM
WX
TRUNK
TRUNK (hold)
PRI
TUNE
ATT
TEXT
L/OUT
MODE
SRCH
NUMBER KEYS 0-9
DECIMAL POINT
ENTER
or
FUNC + MAN
Activates Scan Mode, resumes scan when stopped on a channel or
talkgroup
If scanning or monitoring a trunked call, stops scan operation, activates
Manual Mode
If monitoring conventional call, stops scan operation, activates Manual
Mode, holds on active channel
If scanning or monitoring a trunked call, stops scan operation, activates
Program Mode
If monitoring conventional call, stops scan operation, activates Program
Mode, holds on active channel
Activates Weather Mode
If monitoring a trunking talkgroup, stores the ID into the next available ID
list memory location
If monitoring a trunking talkgroup, activates ID Hold Mode, scanner holds
on the active talkgroup
Toggles priority
Enters Tune Mode
Toggles attenuation for active channel, or, if global attenuation is set,
toggles global attenuation on or off
If monitoring a trunking talkgroup, toggles talkgroup alphanumeric text tag
or trunking ID display
If monitoring a trunking talkgroup, locks out the active talkgroup so it will
not be monitored
If monitoring a conventional channel, locks out the active channel so it will
not be monitored
If monitoring a conventional channel, cycles through the valid modes,
clears any stored CT or DC code
Activates Search Mode
Toggles scan banks on or off
When monitoring a conventional channel, toggles delay for that channel on
or off
When monitoring a conventional channel that is programmed for CT or DC
Search Mode, stores a detected CT or DC code with the channel memory
Changes scan direction, up or down
Toggles digital AGC
Function
110
Page
49
50
30
63
38
82
40
60
68
85
65, 85
42
52
50
65
51
49
78