Search Mode - Radio Shack PRO-96 Owner's Manual

Search Mode

Keystrokes
SCAN
MAN
PGM
WX
PRI
TUNE
ATT
L/OUT
PAUSE
MODE
SRCH
DECIMAL POINT
or
FUNC + MAN
FUNC + PRI
FUNC + TUNE
FUNC + ATT
FUNC + L/OUT
FUNC + MODE
FUNC + SRCH
FUNC + PGM
FUNC + ENTER
FUNC + 7
FUNC + 0
Activates Scan Mode
Activates Manual Mode
Activates Program Mode
Activates Weather Mode
Toggles priority
Enters Tune Mode
Toggles attenuation for active search range, or, if global attenuation is set,
toggles global attenuation on or off
Locks out undesired search frequencies or search channels
Pauses and resumes search operations
Cycles through AM/FM/CT/DC modes for selected search range
Steps through the available search ranges
Toggles delay on or off in selected search range or search channel
Changes search direction
Toggles digital AGC
When searching SR1to SR6, stores active search frequency in priority
memory
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in tune memory
Toggles attenuator mode, normal or global
In SR0, SR1, SR2, steps to next locked out search channel, must be in "M"
state. In SR3, SR4, SR5 and SR6, enters Search Lockout Review, use
arrow keys to review locked frequencies, use CLR to clear locked
frequencies, use FUNC + 6 to clear all locked frequencies
Sets mode to default for active search range
Toggles Manual Channel Select or Search Channels for SR0, SR1 and
SR2
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in desired bank and channel (e.g., "123 + ENTER" stores the active
frequency in Bank 1, Channel 23)
When searching SR3, SR4, SR5 and SR6, stores active search frequency
in next available channel in desired bank (e.g., "1 + ENTER" stores active
frequency in next empty channel in Bank 1)
Toggles Seek on or off
Toggles Zeromatic on or off
Function
114
Page
49
50
30
63
40
60
68
66
52
52
52
52
52
78
41
60
68
67
52
52
61
61
59
59