Base And Handsetr; Speakerphone, Handset; Handset Ringerm; Auto Talk - RCA 25420 User Manual

Connections and Setup
Base and Handset Ring On/O
1. Press the Menu button while in standby mode.
2. Use the Vol (+ or -) buttons to scroll up or down to
Select/Save button.
3. Use the Vol (+ or -) buttons to scroll up or down to RING ON/OFF. Press the Select/
Save button.
4. Use the DIR/CID buttons to scroll left and right between L1 and L4, and press the
Speakerphone, Handset, and Headset Volume
While the phone is in use, during the desired mode, press the Vol (+ or -) buttons
until you reach a comfortable listening level. The phone stores the setting after the
last button press.
Handset Ringer Melody
1. Press the Menu button while in standby mode.
2. Use the Vol (+ or -) buttons to scroll up or down to
SOUND SETTING.
3. Press the Sel/Save button.
4. Use the Vol (+ or -) buttons to scroll up or down to HS SETTING.
5. Use the Vol (+ or -) buttons to scroll up or down to RING MELODY.
6. Press the Sel/Save button. The ringer tone settings for
four telephone lines show in the display.
7.Use the Vol (+ or -) buttons to scroll up or down to select each
ringertone for all of 4 lines. A sample ringer tone is generated when
you scroll to individual ringer tones.

AUTO TALK

1. Press Menu button once, then press the VOL (
SETTINGS is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( + or
4. Press Select/Save button to select.
5. Use the VOL ( + or
16
-) buttons of the sub-menu until
-) buttons to select ON or OFF. Select ON to let the handset
SOUND SETTING. Press the
all of the
+ or -) buttons until PHONE
AUTO TALK is displayed.