Connecting The Ac; Lectrical ) Power - Rca 4-Line Dect 6.0 Cordless Office Phone 25420 User Manual

Connections and Setup
3. Plug the battery pack cord into the jack inside the compartment.
NOTE: To ensure proper battery installation, the connector is keyed and can be inserted
only one way.
4. Place the battery pack in recessed area of the handset battery compartment.
5. Close the battery compartment by pushing the door up until it snaps into place.
6. Place the handset in the base cradle. The charge/in use indicator turns RED,
verifying the battery is charging.
charge the phone, battery performance may be compromised.
Connecting the AC (Electrical) Power
Plug the power adaptor cord into the power jack on the back of the base and the other
end into an electrical outlet. The charge indicator will turn RED to indicate the battery is
charging when the handset is in the cradle.
the phone, battery performance is compromised.
T-T009 power adaptor listed in the user's guide. This power adaptor is intended
Class (Classe) 2 Power source.
CAUTION: For servicing or replacement, you can purchase a suitable headset
through servide centre or retailer shop.
12