Automatic Cooking; Preference Control - GE JKP77G Use And Care Manual

Example of How to Use
Automatic Cooking
Beep sounds when steam is sensed
and AUTO is replaced by cook
time. At this point, door may be
opened to check foods if desired.
When done, oven beeps and stops.
Place covered food in oven. Touch
AUTO COOK pad. "Enter Code"
flashes on display.
Touch number pad for desired
code. Code 2 shows and "Start"
flashes on display. Touch START.
Word AUTO shows on display,
indicating steam sensor is acti-
vated. DO NOT OPEN DOOR.
COOKING PERFORMANCE MAY
BE AFFECTED.
NOTE: Refer to Automatic Cooking
Chart on oven when door is open
and also on page 22 of this book.
Understanding Automatic
Cooking Codes &
Preference Control
Automatic cooking codes 1 through
9 are designed to give you easy
automatic results with a number
of foods.
.
Codes are arranged in lowest to
highest amount of power. For
example, Code 1 gives least micro-
wave cooking power, Code 2 gives.
more power than Code 1, Code 3
incre~es power over Code 2 and
so on.
The
Preference Control
Another feature to give you flexi-
bility in Automatic Cooking is the
preference control, which can be
used to "fine tune" the power of
Codes 2 through 9. By simply add-
ing a 1 after a Code, you can set the
oven to cook using 20°/0 less time
than the code would regularly
deliver. For example, if Code 4 cooks
your vegetables more done than
you like them, set Code 41 next
time and you will get 20°/0 less
cooking time.
Likewise, if you wish slightly more
time than a code delivers, add a 9
after the Code. For the vegetables
in the example above, Code 49
would provide 20% more time for
cooking than would the regular
Code 4.
Touch AUTO COOK Pad. "Enter
Code" flashes on display.
Code 1, which has the least power,
is used for quick reheating jobs
while the longer cooking foods like
stew or chili use higher codes. A
Cooking Chart and recipes, starting
on page 15 give many tested uses
for automatic cooking codes.
Touch number pads 4 and 1 in that
order. Code 4 shows and "Start"
flashes on display.
Touch START. AUTO shows on
display. If you wish to check foods,
open door after first oven signal.
Close door and touch START.
13
——.. —
I