How To Set Your Digital Clock; Questions And Answers - GE JKP77G Use And Care Manual

How to Set Your Digital Clock
The electronk digital dock on your
cooking center is an accurate solid-
state devke.
CLOCK MUST BE SET BEFORE
ELECTRONIC CONTROLS FOR
CONVENTIONAL OVEN WILL
WORK.
When power is first connected to
your cooking center or after a
power failure of any kind, the digital
display on both the microwave and
conventional oven control panels
show lighted 8's and 18s plus all
oven functions for about 1'5seconds.
Then all lights go off and RESET
appears in the upper display, PF
(for Power Failure) appears in the
lower one.
Touch the CLEAR/OFF pad on the
upper touch control panel and the
microwave oven is ready to use.
How to Set the Clock
Before using the conventional oven,
the electronic digital dock must be
set as followw
Step 1:
Touch the CLOCK pad.
Display shows 0:00.
Step 2: Touch the number pads the
same way you read them. For
example, to set 12:34, touch
number pads 1, 2, 3 and 4 in
that order.
If number pads are not touched
within several seconds after you
touch CLOCK pad, "EEEE flashes
and display reverts to original set-
ting. If this happens, touch CLOCK
pad and enter numbers again.
Step3:
Touch the START pad. This
enters the time and starts the clock.
If you don't touch this pad, the
clock starts automatically after six
seconds.
If you enter an impossible time such
as 12:84, the display flashes "EEEE'
for Error. To correct it, just touch
the correct number pads and the
clock starts.
If PF appears, touch the CLOCK
pad and then the numbers to start
the clock.
To
check the time of day when dis-
play is showing other information,
simply touch the CLOCK pad. Time
of day shows for as long as your
finger is on the pad.
To correct the time of day, touch
the CLOCK pad and enter the cor-
rect numbers.
NOTE: Time of day cannot be
changed during a conventional
oven cooking operation.
Questions
and Answers
Q.
When I came home from shop-
ping the display showed PF instead
of the time. What happened?
A. Your home had a brief power
failure while you were gone.
Nothing is wrong with your clock—
just reset it.
Q. When changing the time of day,
if i touch the CLOCK pad and then
discover that the time shown is right,
do i have to reset the ciock?
A. No. The originai time of day will
reappear in about 15 seconds after
"EEEE' fiashes.
Q. Can i change the ciock while I'm
cooking food in the conventional
oven?
A No. The ciock cannot be changed
during any program that uses the
oven timer or the display. You must
either stop those programs or wait
until they are finished before
changing the time.
Q. Can i check the time of day
whiie the dispiay is showing minute/
second time.
A. Yes. Simpiy touch CLOCK pad
and time of day shows for as long
as your finger is on the pad. Display
reverts to minute/second time as
soon as you take your finger off
the pad.
10
.— .. ..——
——. . ---