Fan Operation - Haier HSU-18,22HVA103/R2(DB) Service Manual

Operation

Fan Operation

Remote controller
POWER/SOFT
HSU-18,22HVA103/R2(DB)
1. Unit start
Press ON/OFF on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
AUTO
Then Select FAN operation
On the displaying board,colorful displaying bar will be pink.
3.Fan speed selection
Press FAN button. For each press, fan speed changes as
follows:
Remote controller:
LOW
4.Unit stop
Press ON/OFF button, the unit stops.
About FAN operation
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode ,AUTO is
not available in FAN mode.And temp.setting is disabled.
In FAN mode,SLEEP and POWER/SOFT operation is
not available.
60
System Configuration
COOL DRY FAN HEAT
HI
MED
Domestic Air Conditioner