Motorola VIP 1216 PVR User Manual page 32

• On the silver/charcoal remote, when an invalid code is entered, the selected mode key will give a long flash to
indicate that you have not entered the set up code correctly
• Should the remote control time-out before you complete the code setup, you will need to start over
6. Point the remote control at the programmed device and press the
• The device should turn off
• If it does not turn off, repeat steps 2 through 5 trying each code for your brand until you find the correct code
7. Repeat steps 1 through 6 to program another device
8. Now that your devices are programmed, you can press the appropriate mode key on the remote control to work
with the selected device. To use the remote control for your MTS TV set-top box again, press the
Program the TV, DVD, or AUX Mode Keys for Ten Popular Brands of Equipment
Black MXv4 (with MTS logo) Remote Only:
• Press and hold SETUP until the mode keys blink twice
• Press the mode key (TV, DVD, or AUX) for the device you wish to set up. The selected mode key should stay lit
• Find your device and brand from the charts below and note which number key is assigned to your brand. If your
brand is not listed in the following chart, then try the Direct Code Entry or the
• Press and hold the number key assigned to the brand of device you are trying to program
• Release the key when your device turns off. Setup for that device is complete
• 2 Blinks of the TV, DVD, or AUX mode key = Success
• 1 Blink of the TV, DVD, or AUX mode key = Failure
Remote Control
Number Key
1
2
3
4
5
6
7
8
9
0
Program the TV, DVD, or AUX Mode Keys Using the Code Search
If you can't find a 4-digit code for your device, try using the search function.
Searching on the black MXv3 remotes cannot be performed for any mode key until after that mode key is set-up with a
valid code. So, select any code for the appropriate mode from the code list, program the key using section A, and then
follow the steps below. For example if you're trying to program a DVD player to the DVD key, but you don't have the
code, program any DVD code from the list to the DVD key using the steps in section A, then you can follow the steps
below
.
1. Turn on the device you want to control and point the remote at that device
2. Press and hold the mode key (i.e. TV, DVD, or AUX) you want to program
3. Without releasing the selected mode key (i.e. TV, DVD, or AUX), press and hold the
TV Brands
Insignia/Dynex
LG
Mitsubishi
Panasonic
Philips/Magnavox
Samsung
Sharp
Sony
Toshiba
Vizio
POWER key once
SETUP
DVD/VCR Brands
LG
Memorex
Panasonic
Philips/Magnavox
RCA
Samsung
Sharp
Sony
Sylvania
Toshiba
STB mode key
key
Audio Brands
Bose
Denon
LG
Onkyo
Panasonic
Philips
Pioneer
Samsung
Sony
Yamaha
OK key simultaneously
29