Optional Equipment - Majestic VF Installation And Operating Instructions Manual

OpTIONAL EqUIpMENT

FORCED AIR kIT (BLOTMC)
If you are installing the forced air kit on VF-TB or VF-R models, see the installation instructions
provided with the kit for electrical wiring requirements, or the blower installation section. The
firebox must be connected to main power supply at time of firebox installation. The blower
must be installed prior to the installation of the vent-free heater. The electrical connections
must be made before the firebox is framed and enclosed in the finished walls.
BRASS OR pEWTER LOUVERS AND FILIGREE
Optional brass or pewter louver kits may be installed in place of the factory installed black
louvers. Refer to installation instructions provided with the brass or pewter louvers.
OpTIONAL TRIM
Optional trim kits can be used with unit when installed as a free standing fireplace with
wood surround.
FIREBRICk
Optional firebrick kits can be installed. See installation instructions provided with kit.
OpTIONAL WIDE CANOpY
The optional wide canopy can be installed. See installation instructions provided with kit.
Electrical connections should only be
performed by a qualified, licensed electrician,
main power must be off when connecting to
main electrical power supply or performing
service.
The blower when installed, must be
electrically grounded in accordance with
local codes or in the absence of local codes,
with the National Electrical Code ANSI/NFpA
70.
71D0531
VF/VFR Vent-Free Fireboxes
15