Side1; Side2 - Sharp AL-1651CS Service Manual

Main Sub
Contents
code code
46 32 Copier color reproduction
setting (COLOR
REAPPEAR)
48 01 Main scan/sub scan
direction magnification ratio
(COPY MAG.)
05 SPF/RSPF mode sub scan
direction magnification ratio
in copying (SPF/RSPF
MAG.)
[Function]
Used to set color reproduction in each mode. Colors easy to be copied and colors difficult to be copied
can be switched.
Set value Colors easy to be copied
0 Purple, Blue, Red
1 Water blue, Green, Blue
2 Yellow, Red, Green
This setting has virtually no effect on black-and-white documents.
When this test command is executed, warm-up and shading are performed and the current set value
is displayed. (Default: 0)
Press [START] key to make a copy under the set conditions . At that time, color components are
changed for used in copying.
To change the mode, press [ / ] key. The code number of the selected mode is dip0slayed on the
LCD.
Specification component
Green
Red
Blue
Mode
AE mode (including TS)
TEXT mode (including TS)
PHOTO mode
[Operation]
The operation is similar to test command 46-01.
[Function]
Used to adjust the magnification ratio in the main scan (front/rear) direction and sub scan direction.
Enter the adjustment value with [10KEY]. Press [START] key to save the set value and make a copy.
(When the adjustment value is increased by 1, the magnification ratio is increased by 0.1%.)
The adjustment mode can be changed by pressing [ / ] key. (Adjustment range: 1 – 99, Default: 50)
Mode
Main scan direction magnification ratio
OC mode sub scan direction
magnification ratio
[Operation]
The operation is similar to test command 46-01.
[Function]
Used to display the current SPF/RSPF mode sub scan direction magnification ratio on the LCD.
When [START] key is pressed, the entered data is acquired and saved into the EEPROM, and a copy
is made. (When the set value is increased by 1, the magnification ratio is increased by 0.1%.)
(Adjustment range: 1 – 99, Default: 50)
When adjusting the RSPF, use [2-SIDED COPY] key to select single/duplex after entering the one
page print mode, performing 2-page single copy.
For printing, regardless of the density mode and the density level,
Density mode = MANUAL
Density level = 3
Mode
Sub scan magnification ratio adjustment on the
surface of SPF/RSPF document
Sub scan magnification ratio adjustment on the
surface of RSPF document
When there is no document in SPF, copy is inhibited.
[Operation]
The operation is similar to test command 46-01.
AL-1651CS TEST COMMAND, TROUBLE CODES 10 - 20
Details of function/operation
Colors difficult to be copied
Yellow, Green, Water blue
Purple, Red, Yellow
Blue, Water blue, Purple
Setting No
0
1
2
Display item Default setting
AE 0
TEXT 0
PHOTO 0
Display item Default value
F-R 50
SCAN 50
Display item

SIDE1

SIDE2

Remark
Default
LED
COPY mode lamp
PRINT mode lamp
SCAN mode lamp
LED
PRINT mode lamp
SCAN mode lamp
Default LED
50 COPY mode lamp
50 PRINT mode lamp