Chapter 6 Trouble Shooting; Cannot Connect To The Internet Over Wired Connection; Cannot Access The Web-Based Configuration Utility; Cannot Connect To The Network Wirelessly - Buffalo WCR-GN User Manual

Airstation n technology wireless n150 router access point & bridge
Hide thumbs Also See for WCR-GN:
Table of Contents

Advertisement

Chapter 6
Trouble Shooting

Cannot connect to the Internet over wired connection.

• Make sure that your AirStation is plugged in!
• Check that the status LEDs of your AirStation are lit as below:
POWER
Green light is ON
WIRELESS Green light is ON or flashing
ROUTER
Green light is ON or OFF (the status varies depending on your environment)
DIAG
OFF
• Make sure that your computer is set to "obtain an IP address automatically". (Refer to page 96)
• Restart your AirStation.

Cannot access the web-based configuration utility.

• Display the configuration screen by following the procedure on page 23.
• Enter the correct user name and password to login to the configuration screen.
If you are using AirStation in factory default settings, enter "root" (in lower case) for the user
name and leave the password blank (enter nothing)
• Verify that your web browser is not set to use proxies.
• Make sure that your computer is configured to "Obtain an IP Address Automatically." (page 96)
• Restart your AirStation.

Cannot connect to the network wirelessly.

Configure your wireless device with the same SSID, encryption type, and encryption key as used
for your AirStation.
WCR-GN User Manual
85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wcr-hp-gn

Table of Contents