Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Buffalo Manuals
  4. Wireless Router
  5. AirStation WBR2-G54S
  6. Quick setup manual

Buffalo AirStation WBR2-G54S Quick Setup Manual

125 high speed mode* wireless cable/dsl router
Hide thumbs Also See for AirStation WBR2-G54S:

Advertisement

Quick Links

Download this manual See also: User Manual
Preparation
This Quick Setup Guide will quickly and easily guide through installing this
product. For advanced setup and confi guration instructions, please refer to
the Online Manual on the AirNavigator CD-ROM or the Buffalo Support Web
Page.
Package Contents Checklist
◗
Wireless Cable/DSL Router (WBR2-G54S)
◗
Utility CD-ROM w/ User Manual
◗
Quick Setup Guides
◗
AC Adapter
◗
7ft. Ethernet Cable
◗
Warranty Statement
If any of the contents are missing or damaged, please contact the retailer or
reseller from which this product was purchased.

Quick Setup Guide

Wireless Cable/DSL Router
* When operating in High Speed Mode™, this Wi-Fi device
achieves an actual throughput of up to 34.1Mbps, which
is the equivalent throughput of a system following 802.11g
protocol and operating at a signaling rate of 125Mbps.
www.buffalotech.com/wireless
125 High Speed Mode*
WBR2-G54S
PY00-29040-DM20

Advertisement

loading

Related Manuals for Buffalo AirStation WBR2-G54S

Summary of Contents for Buffalo AirStation WBR2-G54S

  • Page 1: Quick Setup Guide

    Preparation This Quick Setup Guide will quickly and easily guide through installing this product. For advanced setup and confi guration instructions, please refer to the Online Manual on the AirNavigator CD-ROM or the Buffalo Support Web Page. Package Contents Checklist ◗...
  • Page 2 Step 1 - Gathering Information Depending on the type of broadband internet service you are subscribed to, different types of information may be needed to complete the setup. Acquiring this information in advance will make the setup of your AirStation router simple and quick.
  • Page 3 AirStation router and wait one full minute, and fi nally power on the computer which will be used to confi gure the AirStation. If the red DIAG light on the AirStation is lit or fl ashing after several minutes of being powered on, please consult Buffalo Technology Technical Support.
  • Page 4 ◗ Wired Confi guration Buffalo recommends using a wired connection for initial confi guration, meaning your computer is physically connected to the AirStation with a CAT5 straight cable plugged into one of the four LAN ports. This type of setup will eliminate possible setup problems due to any issues with the wireless adapter on the computer being used to confi...
  • Page 5 ◗ Wireless Confi guration ■ NOTE: If confi guring via a Wired Confi guration, please skip to the next page! Windows 98SE/ME/2000/XP If there is no Ethernet adapter available on the computer being used to confi gure the AirStation, a wireless confi guration may be performed using a correctly installed 802.11b or 802.11g wireless adapter.
  • Page 6 Step 4 - Confi gure your Computer’s IP Address For Windows 98SE/ME - Right-click on Network Neighborhood or My Network Places and select Properties. - Select the Confi guration tab, scroll down to TCP/IP and press Properties. - Select Obtain IP address automatically and Obtain DNS Server address automatically.
  • Page 7 Step 5 - Access the AirStation Confi guration Pages Launch your Web browser and type 192.168.11.1 in the address fi eld of the Web browser window and click “Go.” *If you have previously modifi ed the AirStation and changed the LAN IP address, enter the custom LAN IP address to access the AirStation confi...
  • Page 8 DIAG lights up or fl ashes. The restore process can take up to two minutes. This completes the basic AirStation Confi guration. To change advanced settings, please consult the Online Manual on the CD-ROM or go to the Buffalo Support Web Site: http://www.buffalotech.com/wireless/support ◗...
  • Page 9 AOSS (AirStation One-Touch Secure System) The WBR2-G54S supports Buffalo’s AOSS system for connecting AOSS compatible wireless clients to the WBR2-G54S. For information about AOSS, please refer to the AOSS Supplement which is included in the WBR2-G54S package contents. IP Addressing To verify your IP settings for static or automatic addressing, click Start, select Settings (if present) and click Control Panel.

  • Page 10: Buffalo Technology Technical Support

    Equipment and the mutual recognition of their conformity (R&TTE). Copyright © 2004 Buffalo Technology, Inc. All Rights Reserved. - Buffalo Technology (USA) Inc., is part of MELCO INC., the global manufacturers of IT peripherals, including memory, networking, and multimedia products, inside many of the world’s computers.