Manual Setup - Buffalo WCR-GN User Manual

Chapter 3 Installation

Manual Setup

To configure the WDS without using the utility CD, follow the procedure below.
1
Fix your computer's IP address. For details, please refer to Appnedix C (page 96).
ex) IP address
Subnet mask
Default gateway
Preferred DNS server
Alternate DNS server
2
Turn off your computer.
3
Connect your computer to one of the AirStation's LAN ports with the Ethenet cable.
Turn on the AirStation, wait one minute, and then turn on your computer.
AirStation wireless router
(rear side)
power outlet
4
Wait for a while, and then make sure that the AirStation's LEDs are lit as described below:
POWER
WIRELESS
ROUTER
DIAG
※ Refer to page 8 and 10 for LED locations and other details.
WCR-GN User Manual
192.168.11.80
255.255.255.0
blank
blank
blank
1) connect
PC
1) connect
Ethernet cable
2) connect the power supply
Green light is on
Green light is on
Green light is on
Off
20