Buffalo WCR-GN User Manual page 22

Chapter 3 Installation
5
Open the web configuration screen. Refer to page 23 for the instruction as necessary.
6
In the "Mode information" menu, select "Bridge Mode" and click "Apply".
7
8 Web configuration screen will open again. Click "Wireless Config" , then "WDS".
Check "Use" option and select "Manual" from the "Connection type".
9
Click "Search"
WCR-GN User Manual
When this below screen appears, re-enter
the user name "root" and password set up
for web configuration screen. Click "OK".
21