Not Enough Available Space - Canon Vixia HFR40 Instruction Manual

LCD Screen has been dimmed Use the [LCD Backlight] setting to change the brightness
- Change the
May not be possible to record movies on this memory card
- You may not be able to record movies on a memory card without a Speed Class rating or with
one rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or
10.
Mem. Card Number of scenes already at maximum
- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);
no further scenes can be copied onto the memory card. Delete some scenes (A 56) to free
some space.
Mem. Card Unable to recognize the data
- The memory card contains scenes recorded using a video configuration that is not supported
(PAL or SECAM). Play back the recordings in the memory card with the device originally used
to record them.
Memory card cover is open
- After inserting a memory card, close the memory card slot cover.
Memory card is full
- The memory card is full. Delete some recordings (A 56, 58) to free some space or replace
the memory card.
Memory card is write-protected
- The LOCK switch on the memory card is set to prevent accidental erasure. Change the posi-
tion of the LOCK switch.
Memory card writing error Attempt to recover the data?
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the memory. Select [Recover] to try to
recover the recordings. If you inserted a memory card that contains scenes recorded using
another device, we recommend that you select [No].
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing on the memory card and later the posi-
tion of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (A 29).
- The memory card may not be inserted correctly. Insert the memory card all the way into the
memory card slot until it clicks.

6/4 Not enough available space

- Delete some recordings on the memory card (A 56, 58) or select [4 Mbps] for the conver-
sion.
168
Additional Information
> >
[LCD Backlight] setting to [Normal] or [Bright].