Canon Vixia HFR40 Instruction Manual page 139

[Search for Access Points] method. Refer also to the router's instruc-
tion manual.
1 [WPS: Button] method
Press and hold the WPS button on the wireless router.
• Depending on the router, the amount of time required may differ.
• Make sure the router's WPS function is activated.
[WPS: PIN Code] method
From a computer or similar device connected to the wireless router,
use the Web browser to open the router's WPS settings screen. After
the 8-digit PIN code appears on the camcorder's screen, enter it into
your router's WPS settings screen.
2 Within 2 minutes, touch [OK] on the camcorder's screen.
• The camcorder will connect to the wireless router.
• You can touch [Stop] and then [OK] to interrupt the Wi-Fi Protected
Setup while it is in progress.
• After the connection is established, continue using the function you
were previously using. For details, refer to the procedure in
and Changing Wi-Fi Settings
Using Web Services
as necessary.
Searching for Access Points
The camcorder will automatically detect access points in the vicinity.
After you select the desired access point, you simply enter the pass-
word (encryption key) to connect the camcorder.
To enter text for the various settings, use the virtual keyboard (A 140).
1 Note the access point's network name (SSID) and encryption key.
2 When the detected access points appear, touch the desired
access point and then touch [OK].
You can touch [Í] and [Î] to go through the detected access points.
3 In the field for encryption key, enter the encryption key and then
touch [OK].
If the access point selected in step 2 did not have a [C] icon, this step
is not necessary.
(A 142),
Playback on a Computer
(A 133) or
Sharing Your Recordings
Wi-Fi Functions
Viewing
(A 136)
139