Canon Vixia HFR40 Instruction Manual page 127

Operating modes:
1 Camcorder: From any movie index screen, set the camcorder to
connect with the smartphone.
>
• The camcorder's SSID (network name) and password will appear.
• The camcorder will be ready to connect with the smartphone.
2 Smartphone: Activate Wi-Fi in the settings screen.
The network names of detected access points will appear.
3 Smartphone: Touch the access point with the same SSID as that
of the one from step 1.
4 Smartphone: Enter the password (first time only).
• [Connected] will appear on the camcorder's screen and the
connection will be established.
• If you have already performed this procedure before, the connection
will be established automatically without entering the password.
5 Smartphone: Start the Web browser.
6 Smartphone: Enter the URL that appears on the camcorder's
screen into the Web browser's address bar.
• The Remote Browse screen will appear.
• The URL is always the same so you may find it convenient to
bookmark the URL.
7 Smartphone: Touch [&·] on the upper left of the screen and
open the desired index screen. Next, touch the desired recording
from the list.
SCN
>
[ Wi-Fi]
Smartphone or similar device
[ Playback via Browser]
>
[OK]
Wi-Fi Functions
127