Do you have a question about the 400E CrossWalk and is the answer not in the manual?
Questions and answers
Bart
February 8, 2025
What year my treadmill made
1 comments:
Mr. Anderson
May 14, 2025
The Pro-Form 400E CrossWalk treadmill was made in 2006.
This answer is automatically generated
Bob Morrison
February 27, 2025
My treadmill turns on for about 2 seconds and shuts off?
1 comments:
Mr. Anderson
May 14, 2025
The Pro-Form 400E CrossWalk treadmill could turn on for only 2 seconds before shutting off due to a tripped circuit breaker. To fix this:
1. Check the circuit breaker located on the treadmill frame near the power cord. 2. If it is tripped, wait for five minutes, then press the switch back in. 3. Ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, then plug it back in. 4. Remove and reinsert the key into the console.
If the treadmill still does not run, further service may be required.
Need help?
Do you have a question about the 400E CrossWalk and is the answer not in the manual?
Questions and answers
What year my treadmill made
The Pro-Form 400E CrossWalk treadmill was made in 2006.
This answer is automatically generated
My treadmill turns on for about 2 seconds and shuts off?
The Pro-Form 400E CrossWalk treadmill could turn on for only 2 seconds before shutting off due to a tripped circuit breaker. To fix this:
1. Check the circuit breaker located on the treadmill frame near the power cord.
2. If it is tripped, wait for five minutes, then press the switch back in.
3. Ensure the power cord is securely plugged in. If it is, unplug it, wait five minutes, then plug it back in.
4. Remove and reinsert the key into the console.
If the treadmill still does not run, further service may be required.
This answer is automatically generated