Configuring System Recording Quality - Lorex LH140 Instruction Manual

3 Click the recording grid, and select the type and duration of recording.
4 (Optional) Use the top Copy and Copy To drop-down to copy the recording schedule to a
specific day or all days. Click Copy to copy the schedule.
5 (Optional) Use the bottom Copy and Copy To drop-down to copy the recording schedule to a
specific channel or all channels. Click Copy to copy the schedule.
6 Click Save to apply your settings.

Configuring System Recording Quality

1 Click the Remote Setting tab, and click Record>MainStream.
2 Under Resolution Mode, select D1 or 960H. If you do not have 960H-compatible cameras, it is
recommended to select D1, as D1 will provide a higher number of total frames per second
(FPS) for recording. If you change the Resolution Mode setting, the system will restart once
you save your changes.
3 Configure the following:
• Channel: Select the channel you wish to apply the settings to.
• Resolution: Select the desired recording resolution.
• FPS (Framerate): Select the desired recording frame rate. Note that higher frame rates
require greater bandwidth consumption during remote viewing.
• Audio: Select whether you want the system to record audio (audio cameras required, not
included).
4 Click Save to apply your settings.
Remote Viewing Interface
79