Advertisement
Connect the camera's DC and
BNC socket cable to the extension
cable's DC and BNC plugs. Then
connect the BNC extension cable
to an open channel on the back of
the DVR.
Connect the extension cable's DC socket to
the multiple sockets on the power splitter.
Then, plug the single end of the power splitter
to the DC plug on the power adapter.
4
Connection Diagram
For 2 & 4 camera packs:
The RS485 connection requires a plug to be attached to
the wire terminals provided using
to - as marked on the plastic sheath of the connector
nears the screws. Use a precision flat-head screwdriver
and ensure the wires are held firmly and won't slip out
over time. Don't use too much force when tightening the
screws. Also, the PTZ address needs to be changed for
the RS485 control to work - see page 26 of the DVR's user
manual.
For a single camera:
Connect the extension
cable's DC socket to the
DC plug on the power
adapter.
RS485 connection:
RED
to + and BLACK
Advertisement
