Searching For A Particular Point On A Disc; Resuming Playback From The Point Where You Stopped The Disc (Resume Play/Multi-Disc Resume) - Sony DVP-NS305 Service Manual

and may affect your ears or cause your
speakers to be damaged.
Notes on playing DVDs with a DTS sound
track
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound
tracks, set "DTS" to "ON" in "AUDIO
SETUP" (page 62).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" to "ON" in "AUDIO SETUP"
(page 62). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Additional operations
DVP-NS315 DVP-NS415
REPLAY
To Operation
Press x
Stop
Press X
Pause
Press X or H
Resume play after
pause
Press > on the
Go to the next chapter,
track, or scene in remote, or briefly turn
continuous play mode the Playback Dial* on
the player clockwise
Press . on the
Go back to the
previous chapter, remote, or briefly turn
track, or scene in the Playback Dial* on
continuous play mode the player
counterclockwise
Press Z
Stop play and remove
the disc
28
Playback direction
× 2B (DVD/CD only) t 1M t 2M
Opposite direction
× 2b (DVD only) t 1m t 2m
× ×
The " 2B"/" 2b" playback speed is about
twice the normal speed. The "2M"/"2m"
playback speed is faster than "1M"/
"1m."
Watching frame by frame (Slow-
motion play)
m or M
Press when the player is
in pause mode. To return to the normal speed,
press H.
m or M
Each time you press
during Slow-motion play, the playback speed
changes. Two speeds are available. With each
press the indication changes as follows:
Playback direction
y 1
2
Opposite direction (DVD only)
y 1
2
The "2 y"/"2
" playback speed is slower
than "1 y"/"1
."
Using the Playback Dial on the
player (DVP-NS315 only)
You can search for a particular point on a disc
in various ways using the Playback Dial.
To go to the next chapter/track/scene
During playback, briefly turn the Playback
Dial clockwise to skip to the next chapter/
track/scene, or counterclockwise to skip to
the previous ones.
To locate a point quickly (Search)
During playback, turn and hold the Playback
Dial clockwise to locate a point in the
playback direction, or counterclockwise to
locate a point in the opposite direction. When
you find the point you want, release the dial to
return to normal playback speed.
30
To Operation
Replay the previous Press REPLAY
scene (DVD only)
* Operable when the MODE CHANGE indicator
lights up in green or turns off. For more details
about the Multi-mode Playback Dial, see page 30
(DVP-NS415 only).
z Hint
The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
Locking the disc tray (Child
Lock)
You can lock the disc tray to prevent children
from opening it.
DVP-NS315 DVP-NS415
ENTER
RETURN
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and "LOCKED" appears
on the front panel display.
The Z button on the player or the remote does
not work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Using the Multi-mode Playback
Dial on the player (DVP-NS415
only)
You can search for a particular point on a disc
in various ways using the MODE CHANGE
button.
To go to the next chapter/track/scene
During playback and with the MODE
CHANGE indicator turned off, briefly turn
the Multi-mode Playback Dial clockwise to
skip to the next chapter/track/scene, or
counterclockwise to skip to the previous
ones. (The same operation can be made when
the MODE CHANGE indicator lights up in
green.)
To locate a point quickly (Search)
During playback and with the MODE
CHANGE indicator turned off, turn and hold
the Multi-mode Playback Dial clockwise to
locate a point in the playback direction,
counterclockwise to locate a point in the
opposite direction. When you find the point
you want, release the dial to return to normal
playback speed.
To locate a specific title/chapter/track
1
Press MODE CHANGE repeatedly so
that the indicator lights up in green.
2
During playback, turn and hold the
Multi-mode Playback Dial clockwise to
locate succeeding titles/chapters/tracks,
or counterclockwise to locate preceding
ones.
To play one frame at a time (Freeze
Frame)
1
Press MODE CHANGE repeatedly so
that the indicator lights up in amber.
2
During playback, turn the Multi-mode
Playback Dial clockwise to go to the next
frame, or counterclockwise to go to the
previous frame. If you turn and hold the
dial, you can view the frames in
succession.
Note
Even if you select "RESET" under "SETUP" in the
Control Bar (page 58), the disc tray remains locked.
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume
Play/Multi-disc Resume)
The player remembers the point where you
stopped the disc.
DVP-NS315 DVP-NS415
Resuming playback for the
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing [/1.
1
While playing a disc, press x to stop
playback.
"RESUME" appears on the front panel
display.
2
Press H.
The player starts playback from the point
where you stopped the disc in Step 1.
z Hint
To play from the beginning of the disc, press x
twice, then press H.
1-7
Searching for a
Particular Point on a
Disc
(Scan, Slow-motion Play,
Search, Freeze Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
DVP-NS315 DVP-NS415
Playback Dial (DVP-NS315)
Multi-mode Playback Dial (DVP-NS415)
MODE CHANGE
(DVP-NS415 only)
Note
Depending on the DVD/VIDEO CD, you may not
be able to do some of the operations described.
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
m or M
Press while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
m or M
press during scan, the
playback speed changes. Three speeds are
available. With each press the indication
changes as follows:
, continued
29
Notes
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
– you open the disc tray (DVP-NS315 only).
– you disconnect the power cord.
• When playing a CD, the point where you stopped
is cleared when the disc tray is opened or the
power cord is disconnected.
• When playing a DATA CD, the point where you
stopped playing is cleared when the player enters
standby mode, the disc tray is opened, or the
power cord is disconnected.
• This function may not work with some discs.
Storing the point where you
stopped the disc (Multi-disc
Resume) (DVP-NS415 only)
The player stores the point where you stopped
the disc and resumes playback from the same
point the next time you insert the same disc.
Resume playback points for up to 6 different
DVD/VIDEO discs remain in memory even if
you disconnect the power cord. When you
store a resume playback point for the seventh
disc, the resume playback point for the first
disc is deleted.
z Hints
• To play from the beginning of the disc, press x
twice, then press H.
• To turn off the Multi-disc Resume function, set
"MULTI-DISC RESUME" in "CUSTOM
SETUP" to "OFF" (page 60). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• This function may not work with some discs.
31