Advertisement
Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a total
of eight handsets may be added.
Handset Setup
Before using your handset, follow these steps:
1
Remove protective
plastic film from
display.
2 Insert batteries
as shown.
3
Place cover on back
of handset and push
gently upward until it
clicks into place.
4 Place handset in
charger with
display facing out.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh
"AA" rechargeable batteries. DO NOT USEALKALINE, LITHIUM,
OR NON-RECHARGEABLE BATTERIES.
1
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base station.
Additional cordless handsets need to be registered to the base station.
If the handset is not already on, press PWR key in the
lower right corner of handset.
When "Please Register" is displayed, press OK.
Enter System PIN and press OK (default is 0000).
At base station, press MENU.
Scroll to "System Settings" by pressing >FWD key and
2
3
4
5
then press SELECT
Powe: key
Enter System PIN and press SELECT (default is 0000).
Scroll to "Mobile Registration" by pressing >FWD key and then press
SELECT
When "Select Intercom Number" is displayed on handset, scroll to
number you want to assign, and press OK.
When completed, you will hear a confirmation beep.
See User Manual for additional options.
c
Customer Care: l-888-777-0211
Or visit ourwebsite: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en espaiiol.
Advertisement
