Accessories; Standard Accessories; Optional Accessories - Hitachi H 65SD2 Instruction And Safety Manual

WARNING:
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.

STANDARD ACCESSORIES

(1) Case (Code No. 314179) ...................................................................................................... 1
(2) Allen Wrench (for 8 mm bolt) (Code No. 872422) ............................................................. 1
(3) Allen Wrench (for 4 mm bolt) (Code No. 943277) ............................................................. 1

OPTIONAL ACCESSORIES ........

Demolitioning
(1) Bull Point
Groove digging and edging
(1) Cold chisel

ACCESSORIES

ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
Overall Length
Code No.
Overall Length
Code No.
sold separately
+
16-9/64" (410 mm)
996372
+
16-9/64" (410 mm)
996373
20-15/32" (520 mm)
985231
English
15