Table of Contents
Advertisement
6.
If the Print Server is to be operated under Novell Directory Ser-
vices, type in a
the appropriate fields. Be sure to give the whole context, whether
typed or typeless, and do not begin your context path with a trail-
ing period (.). If you don't know your tree, type: whoami at the
DOS command line. A typed context name example is:
ou=standard.ou=organization_1
7.
In the default mode, the Print Server scans each queue which it is
to service once per second. If you prefer a longer scan rate, you
may enter the time between scans in seconds in the
field.
Scan Rate
8.
The NIC will normally monitor the network to determine which
frame type is being used for NetWare. When it recognizes a type,
it will assume the same frame type. Once it selects a frame type,
the NIC will only operate over that NetWare frame type. Monitor-
ing normally starts looking for IEEE 802.3, then Ethernet II, then
802.3 SNAP, etc. If your network is using multiple frame types for
NetWare, you should bias the frame search to the desired type by
setting the button next to the designation under
Type
.
9.
You can
Disable Bindery
operating in NDS mode only. To do so, click on that box. If you
disable Bindery, the NIC will not support Print Servers on a Bind-
ery file server.
10. Once you have selected all desired settings and entered the desired
NetWare information, you may cause this information to be
entered in the NIC NVRAM by clicking on
with all value changes, if you have not entered the NIC Manage-
ment Password before, you must enter it in the appropriate space
before clicking on
11. Entered values do not take effect until the NIC is reset or power
cycled. You may reset from MAP or the Web Browser by return-
ing to the Network Settings page, and click on
. Now click on
tem
cycle the printer. The new NetWare values should now be in
effect.
entry and
Context
mode on the Print Server if you are
Accept Settings
. Alternatively, you may power
Reset Unit
4.4 NIC Configuration
Preferred NDS Tree
Print Queue
Ethernet Frame
Accept Settings
.
Reset
entry in
. As
under
Sys-
4-23
Advertisement
Table of Contents
Troubleshooting
