Table of Contents
Advertisement
3.1 Discovery Program – Management Access Program (MAP)
3.1 Discovery Program – Management Access Program (MAP)
3.1 Discovery Program – Management
Access Program (MAP) –
The Management Access Program (MAP) uses a Windows-based Web
Browser linked with a proprietary bi-directional IPX/IP channel
program to allow access to the NIC's HTML-based monitoring and
maintenance capabilities. It is possible to search and manage IPX and
IP based printers with this program, however it is necessary to first
install TCP/IP, and preferably IPX/SPX protocols and a Web Browser
onto your PC. This program allows you to:
•
Configure your network protocols for the NIC.
•
Reset the NIC remotely to either clear an error condition, or return
the print server to its factory default settings.
•
Troubleshoot problems in the NIC.
•
Enable or disable the status report printout.
Note
• To be able to change parameter values with the MAP or the Web
Browser, you must know the NIC management password. The factory
default password is "
3.1.1 Installing the MAP
Use the following procedure for an automatic installation of the MAP.
If the opening screen does not appear as described in step 1, follow the
instructions for the manual installation procedure.
1.
Insert the CD-ROM into your workstation's CD-ROM drive. The
opening screen appears automatically.
2.
Click the
CD-ROM Contents
screen.
3.
Click
Installation/Configuration Programs
of the
Introduction
4.
Select the program that you want to install and follow the instruc-
tions displayed on the screen.
3-2
".
sysadm
button to display the
screen.
Introduction
located at the bottom
Advertisement
Table of Contents
Troubleshooting
