Table of Contents
Advertisement
6.2 UNIX Printing
2.
Select your system. Choose one from these options:
1) AT&T/SVR4; 386
2) SCO UNIX System V
3) None of the above
Type
1
,
3.
"What is the node name of the NIC?"
Type the name assigned in the /etc/hosts file and press
For example: Type
4.
"What is the printer name for this NIC-linked printer?"
Type a printer name and press
5.
Your screen will now display the information you provided the
install script. For example:
Node name of the NIC: printfast
Printer name to be used: <printer_name>
The printer is attached on: PORT 1
6.
"Do you want to accept this configuration?"
Type
yes
7.
"Is this printer PostScript?"
Type
yes
8.
The script automatically starts the daemon for the newly config-
ured printer. It also displays the path used should you ever need to
restart the daemon. In the preceding example, the path would be:
/usr/nic/lpr_print /dev/nic/<printer_name>
printfast 10001 &
This example reflects names supplied the script earlier.
When the installation script is complete, you must still configure the
printer and make it known to the lp system.
6-34
2
, or
3
and press
printfast
or
and press
no
or
and press
no
.
Enter
and press
.
Enter
.
Enter
.
Enter
.
Enter
.
Enter
Advertisement
Table of Contents
Troubleshooting
